? coilcraft, inc. 2005 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpo6610 series document 333-1 document 333-1 revised 05/28/03 measuring just 1 mm high, the lpo6610 is our lowest profile power inductor! this series has been specially de- signed for applications requiring a very small footprint and the lowest possible height: notebook computers, pdas, pc cards, mobile phones and other handheld products. the specially designed ceramic case totally protects the winding while the flat top provides the best possible surface for pick and place handling. coilcraft designer?s kit c167 contains samples of all values shown. to order, contact coilcraft or purchase on-line at http://order.coilcraft.com . l 2 dcr srf 20% max typ i sat 3 i rms 4 part number 1 (h) (ohms) (mhz) (a) (a) lpo6610-122m_ 1.2 0.08 190 2.1 1.7 lpo6610-152m_ 1.5 0.10 140 1.9 1.5 lpo6610-222m_ 2.2 0.12 115 1.6 1.4 lpo6610-332m_ 3.3 0.16 90 1.3 1.2 lpo6610-472m_ 4.7 0.20 88 1.1 1.1 lpo6610-682m_ 6.8 0.32 66 0.90 0.85 lpo6610-103m_ 10 0.41 55 0.80 0.75 lpo6610-153m_ 15 0.55 42 0.65 0.60 lpo6610-223m_ 22 0.85 38 0.50 0.52 lpo6610-333m_ 33 1.3 29 0.40 0.42 lpo6610-473m_ 47 1.8 22 0.35 0.36 lpo6610-683m_ 68 2.5 18 0.30 0.30 lpo6610-104m_ 100 3.5 14 0.25 0.26 lpo6610-154m_ 150 5.0 12 0.18 0.21 lpo6610-224m_ 220 7.0 10 0.16 0.18 lpo6610-334m_ 330 15.0 8 0.13 0.13 1. when ordering, please specify packaging code: lpo6610-334m c packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (1000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. 2. inductance tested at 100 khz, 0.1 vrms, 0 adc. 3. dc current at which the inductance drops 10% (typ) from its value without current. 4. average current for a 40c rise above 25c ambient. 5. operating temperature range ? 40c to +85c. 6. electrical specifications at 25c. see qualification standards section for environmental and test data.
? coilcraft, inc. 2005 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpo6610 series typical l vs frequency typical l vs current document 333-2 document 333-2 revised 12/14/03 0.1 1 10 100 1000 0.01 0.1 110 current (a) inductance (h) 10 h 100 h 1.2 h 0.1 1 10 100 1000 0.01 0.1 110 frequency (mhz) inductance (h) 10 h 100 h 1.2 h 0.216 5,50 max 0.040 0.004 1,00 0,10 0.260 6,60 max 0.029 0,750 dash number internal code 0.192 4,90 0.134 3,40 0.100 2,54 0.185 4,70 0.100 2,50 0.150 3,80 0.270 6,90 recommended land pattern xxx x terminations: silver-palladium-platinum tape and reel: 1000/7 reel 12 mm tape width for packaging data see tape and reel specifications section.
|
